1、Designation:D 5585111Standard Tablesof Body Measurements for Adult Female Misses FigureType,Size Range 00201This standard is issued under the fixed designation;the number immediately following the designation indicates the year of originaladoption or,in the case of revision,the year of last revision
2、.Anumber in parentheses indicates the year of last reapproval.Asuperscriptepsilon()indicates an editorial change since the last revision or reapproval.1NOTEMeasurements in Tables 1 and 2 for Upper-Chest Girth,Size 8,Shoulder Slope,Shoulder and Arm Length andArm Length were corrected editorially in M
3、ay 2012.INTRODUCTIONThese body measurement tables were developed from evaluation of data currently used in theapparel industry.These tables were developed from data published by the U.S.Department ofCommerce,2Caesar Study3,Size USA Study,4Current USA industry and studies,and scans anddocumentation f
4、rom Alvanon Inc.5This standard takes into consideration Misses figure at a standardheight of 5 ft 5 in.(65%of average USA population)taking into account the decrease and increasein body weight that shift a person from one size to another,while this person does not gain in height.Also included is a d
5、efinition of body type,Curvy or Straight as applied to waist,high hip,hip seat,thigh and mid-thigh girths that result in a different body shape(silhouette).Major review andevaluation was done.The incremental growth at different key body points has been addressed anddefined,which resulted in identify
6、ing increases and decreases at different rates in specific areas;bust,waist,high hip and hip/seat.Additionally,to better serve the industry,incremental movement betweensizes was reviewed ensuring smooth transition between sizes.To verify the proposed bodymeasurements,a three-dimensional Avatar was c
7、reated in the Misses size range 00 through 20(Curvyand Straight)by Alvanon Inc.for a visual reference and is also attached in the documentation.1.Scope1.1 These tables list body measurements of adult femalemisses figure Type sizes 00 through 20.Although these arebody measurements,they can be used as
8、 a baseline in design-ing apparel for Missy in this size range when considering suchfactors as fabric type,ease for body movement,styling,and fit.1.2 These tables list body measurements for the completerange of Missy sizing.1.3 The values stated in either SI units or inch-pound unitsare to be regard
9、ed separately as standard.The values stated ineach system may not be exact equivalents;therefore,eachsystem shall be used independently of the other.Combiningvalues from the two systems may result in non-conformancewith the standard.2.Referenced Documents2.1 ASTM Standards:6D 123 Terminology Relatin
10、g to Textile MaterialsD 5219 Terminology Relating to a Body Dimension forApparel Sizing2.2 ISO Standards:7ISO 3635 Size Designation of Clothes,Definitions,andBody Measurement Procedures3.Terminology3.1 Definitions:1This table is under the jurisdiction of ASTM Committee D13 on Textiles andis the dire
11、ct responsibility of Subcommittee D13.55 on Body Measurement forApparel Sizing.Current edition approved July 1,2011.Published August 2011.Originallyapproved in 1994.Last previous edition approved in 2001 as D5585-95(2001)which was withdrawn January 2010 and reinstated in July 2011.DOI:10.1520/D5585-
12、11E01.2U.S.Department of Commerce,Voluntary Product Standard:Body Measure-ments for Sizing of Girls Apparel,NIST Publication No.PS 54172,WashingtonDC.3Caesar:Summary Statistics for theAdult population(Ages 18-65)of the UnitedStates of America,2002.4Available from:http:/ W.30th Street,Suite 1000,New
13、York,NY 10001.6For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.7Available from American National Standards Institut
14、e(ANSI),25 W.43rd St.,4th Floor,New York,NY 10036,http:/www.ansi.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 3.1.1 For definitions relating to body dimensions,refer toTerminology D 5219.3.1.2 For definitions of other textile terms
15、 used in thisstandard,refer to Terminology D 12303.4.Significance and Use4.1 The use of the body measurement information in Table1 and Table 2 will assist manufacturers in developing patternsand garments that are consistent with the current anthropomet-ric characteristics of the population of intere
16、st.This practiceshould in turn reduce or minimize consumer confusion anddissatisfaction related to apparel sizing.(Also refer to ISO3635.)4.2 Three-dimensional avatars depicting each of the missysizes and sub category curvy and straight on certain measures,were created by Alvanon,Inc.and included in this standard toassist manufacturers in visualizing the posture,shape,andproportions generated by the measurements charts in theaccompanying tables.(Avatar 1-6)See Fig.1 and Fig.2.5.Apparatus5.1 Tape