1、Designation:D539604(Reapproved 2015)Standard Specification forReclaimed Perchloroethylene1,2This standard is issued under the fixed designation D5396;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number
2、in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This specification covers the grade of perchloroethylenetypically needed in various industries for noncriticalapplications,such as in metal cleani
3、ng formulations.It is notrecommended for dry cleaning applications(see SpecificationD4081).It may be used as a reference document by purchasersor by persons establishing in-house perchloroethylene recoveryprograms.2.Referenced Documents2.1 ASTM Standards:3D2108 Test Method for Color of Halogenated O
4、rganicSolvents and Their Admixtures(Platinum-Cobalt Scale)D2109 Test Methods for Nonvolatile Matter in HalogenatedOrganic Solvents and Their AdmixturesD2111 Test Methods for Specific Gravity and Density ofHalogenated Organic Solvents and Their AdmixturesD2942 Test Method for Total Acid Acceptance of
5、 Haloge-nated Organic Solvents(Nonreflux Methods)D2988 Test Methods for Water-Soluble Halide Ion in Halo-genated Organic Solvents and Their AdmixturesD2989 Test Method for Acidity-Alkalinity of HalogenatedOrganic Solvents and Their AdmixturesD3401 Test Methods for Water in Halogenated OrganicSolvent
6、s and Their AdmixturesD3741 Test Methods for Appearance of Admixtures Con-taining Halogenated Organic SolventsD4081 Specification for Drycleaning-Grade Perchloroethyl-eneD6806 Practice for Analysis of Halogenated Organic Sol-vents and Their Admixtures by Gas ChromatographyE1064 Test Method for Water
7、 in Organic Liquids by Coulo-metric Karl Fischer Titration2.2 Government Documents:429 CFR 1910.1200 Department of Labor,OSHA Regula-tions on Hazard Communication49 CFR 100 to 199 Department of Transportation HazardousMaterials Regulations3.Classification3.1 Type IGenerally recognized for use in pre
8、cision ap-plications.3.2 Type IIUse for less demanding precision applications.3.3 Type IIIGeneral-purpose technical grade.4.Properties4.1 Reclaimed perchloroethylene,Type I,shall meet therequirements of Table 1.4.2 Reclaimed perchloroethylene,Type II,shall meet therequirements of Table 1.4.3 Reclaim
9、ed perchloroethylene,Type III,shall meet therequirements of Table 1.5.Packaging and Package Marking5.1 Industrial or commercial quantities shall be packagedand labeled in accordance with DOT regulations as found in49 CFR 100 to 199,in accordance with state and localregulations,and in accordance with
10、 OSHAregulations found in29 CFR 1910.1200.6.Keywords6.1 halogenated solvent;perchlor;perchloroethylene,TypesI,II,and III;perk;reclaimed1This specification is under the jurisdiction of ASTM Committee D26 onHalogenated Organic Solvents and Fire Extinguishing Agents and is the directresponsibility of S
11、ubcommittee D26.02 on Vapor Degreasing.Current edition approved June 1,2015.Published June 2015.Originallyapproved in 1993.Last previous edition approved in 2010 as D5396 04(2010).DOI:10.1520/D5396-04R15.2Tetrachloroethylene:CAS#127-18-4.3For referenced ASTM standards,visit the ASTM website,www.astm
12、.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.4Code of Federal Regulations,available from U.S.Government PublishingOffice,732 N.Capitol St.,NW,Washington,DC 20401-0001,http:/
13、www.gpo.gov.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentionedin this standard.Users of this standard are expres
14、sly advised that determination of the validity of any such patent rights,and the riskof infringement of such rights,are entirely their own responsibility.This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years andif not revised,ei
15、ther reapproved or withdrawn.Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters.Your comments will receive careful consideration at a meeting of theresponsible technical committee,which you may attend.I
16、f you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards,at the address shown below.This standard is copyrighted by ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959,United States.Individual reprints(single or multiple copies)of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585(phone),610-832-9555(fax),or serviceastm.org(e-mail);or through the ASTM web
