收藏 分享(赏)

ASTM_D_1060_-_10_2018.pdf

上传人:益****师 文档编号:184333 上传时间:2023-03-04 格式:PDF 页数:9 大小:143.21KB
下载 相关 举报
ASTM_D_1060_-_10_2018.pdf_第1页
第1页 / 共9页
ASTM_D_1060_-_10_2018.pdf_第2页
第2页 / 共9页
ASTM_D_1060_-_10_2018.pdf_第3页
第3页 / 共9页
ASTM_D_1060_-_10_2018.pdf_第4页
第4页 / 共9页
ASTM_D_1060_-_10_2018.pdf_第5页
第5页 / 共9页
ASTM_D_1060_-_10_2018.pdf_第6页
第6页 / 共9页
亲,该文档总共9页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、Designation:D106010(Reapproved 2018)Standard Practice forCore Sampling of Raw Wool in Packages for Determinationof Percentage of Clean Wool Fiber Present1This standard is issued under the fixed designation D1060;the number immediately following the designation indicates the year oforiginal adoption

2、or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1This practice for sampling covers a procedure forobtaining samples from lots of greas

3、e,pulled,or scoured woolor related animal fibers in bales or bags for the determinationof the clean wool fiber present by a procedure similar to thatdescribed in Test Method D584.1.2This practice provides a description of suitable coresampling equipment,the sampling procedure,and the methodfor deter

4、mining the number of packages to be bored and thenumber of cores to be taken from each sampled package.1.3Reliable estimates are given for the standard deviationof the percentage clean wool fiber present between packagesand within packages for lots of many types of raw wool.1.4 The values stated in

5、inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is th

6、eresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.6 This international standard was developed in accor-dance with internationally recognized principles on standard

7、-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2D123 Terminology Relating to TextilesD584 Test Method

8、 for Wool Content of Raw WoolLaboratory ScaleE105 Practice for Probability Sampling of MaterialsE122 Practice for Calculating Sample Size to Estimate,WithSpecified Precision,the Average for a Characteristic of aLot or ProcessD4845 Terminology Relating to Wool3.Terminology3.1 For all terminology rela

9、ting to D13.13,Wool and WoolFelt,refer to Terminology D4845.3.1.1 The following terms are relevant to this standard:clean wool fiber present,core and raw wool.3.2 For definitions of other textile terms used in thispractice,refer to Terminology D123.4.Summary of Practices4.1 The lot is core sampled i

10、n accordance with one of aseries of equivalent schedules based on estimates of variabilityof the percentage clean wool fiber present and on the requiredlevel of precision.A set of packages of wool is taken as a lotsample.From each package in the lot sample,a fixed numberof cores of wool is drawn to

11、be used as a laboratory sample.Guidance in the selection of the most economical of theequivalent schedules is provided.5.Significance and Use5.1 Core sampling is widely accepted,when applicable,forobtaining a laboratory sample representative of the clean woolfiber present in a lot of packaged raw wo

12、ol.5.2 If the wool is so loosely packed that a core cannot becut,or if it is so highly compressed that the sampling toolcannot readily penetrate into the package to the required depthand in the required direction,core sampling is not applicable.The density of wool in most types of commercial package

13、s issuitable for sampling by this method.5.3 The procedure described in this practice is adapted tothe application of statistical methods for estimating the size ofsample required to achieve a required level of sample precisionat minimum cost.NOTE1The basic sampling equipment,operating procedure,and

14、1This practice is under the juristiction ofASTM Committee D13 on Textiles andis the direct responsibility of Subcommittee D13.13 on Wool and Felt.Current edition approved July 1,2018.Published July 2018.Originally approvedin 1949.Last previous edition approved in 2010 as D1060 10.DOI:10.1520/D1060-1

15、0R18.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C70

16、0,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 statistical approach used in this practice have been adapted for samplinglots of wool for the determination of other properties that are

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 专业资料 > 国外标准

copyright@ 2008-2023 wnwk.com网站版权所有

经营许可证编号:浙ICP备2024059924号-2