1、Designation:F106297(Reapproved 2013)Standard Test Method forVerification of Ski Binding Test Devices1This standard is issued under the fixed designation F1062;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.
2、A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method defines procedures to determine agree-ment between a standard apparatus for measuring the releasemoments of ski bindings
3、 and a test device of unspecifieddesign.1.2 This test method also covers procedures for checkingagreement between individual devices of identical but unspeci-fied design,intended for determining the release moments ofski bindings.1.3 Values expressed in newton meters,newtons,and cen-timeters are to
4、be regarded as the standard.1.4 Values expressed in units of torque may be converted tothe appropriate force values when devices which indicate forceare used.1.5 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of
5、this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Standards:2E4 Practices for Force Verification of Testing MachinesE29 Practice for Using Significant Digits in Test Data toDeterm
6、ine Conformance with SpecificationsE74 Practice of Calibration of Force-Measuring Instrumentsfor Verifying the Force Indication of Testing MachinesE456 Terminology Relating to Quality and StatisticsF504 Test Method for Measuring the Quasi-Static ReleaseMoments of Alpine Ski BindingsF1061 Specificati
7、on for Ski Binding Test DevicesF1063 Practice for Functional Inspections and Adjustmentsof Alpine Ski/Binding/Boot SystemsF1064 Practice for Sampling and Inspection of Completeand Incomplete Alpine Ski/Binding/Boot Systems inRental Applications3.Terminology3.1 DefinitionsThe terms and abbreviations
8、used in thisdocument are defined in accordance with Test Method F504,Specification F1061,Terminology E456,Practices E4,andPractice E74.3.2 Definitions of Terms Specific to This Standard:3.2.1 adifference between the calibration of the specificdevice tested for agreement with an instrument of the typ
9、edescribed in Test Method F504 and the calibration of anindividual device of the same design.3.2.2 dagreement between the test device and the standardapparatus described in Test Method F504 and Section 9 of thistest method.3.2.3 rimprecision of the device tested.3.2.4 operating range(OR)the portion
10、of the full range ofthe device which may be employed in accordance withPractices F1063 and F1064.OR shall be defined by the user inaccordance with the Inspection section of Annex 2 of PracticesF1063 and F1064.3.2.5 recommended operating range(ROR)the portion ofthe full range of the test device that
11、is in accordance withProposed Specification P 193.3.2.6 reference bindinga binding or group of bindingsused in the verification of a test device.3.2.7 standard apparatuslaboratory equipment includinga test frame and instrumentation used as the basis for compari-son with the test device.3.2.8 test de
12、vicea machine for determining the releasemoments of ski/boot/binding systems.3.3 Symbols:3.3.1 Mz a moment in a horizontal plane as shown in thefigure in Test Method F504,which illustrates terminologyrelating to the boot/ski system.3.3.2 My a moment in a vertical plane with the ski asshown in the fi
13、gure in Test Method F504,which illustratesterminology relating to the boot/ski system.1This test method is under the jurisdiction of ASTM Committee F27 on SnowSkiing and is the direct responsibility of Subcommittee F27.10 on Binding TestProcedures.Current edition approved July 1,2013.Published Augus
14、t 2013.Originallyapproved in 1988.Last previous edition approved in 2008 as F1062 97(2008).DOI:10.1520/F1062-97R13.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the st
15、andards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 4.Significance and Use4.1 Results obtained by this test method can be used todetermine the suitability of specific test device designs inmeas
16、uring the release moments of ski/boot/binding systems.4.2 This test method provides a means by which manufac-turers of test devices and manufacturers of releasable skibindings can provide compatible instructions to facilities whichperform the final inspection of the complete boot/binding/skisystem prior to use.4.3 This test method is not appropriate for determiningprecision between operators.5.Apparatus5.1 Test SkiThe test ski shall meet the stiff ski definition inthe portion of the Apparatus Se
