1、Designation:F219413aStandard Consumer Safety Specification forBassinets and Cradles1This standard is issued under the fixed designation F2194;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revision.A number in paren
2、theses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONThis consumer safety performance specification addresses infant bassinet and cradle incidentsidentified by the U.S.Consumer Product Safety Commission(CPS
3、C).In response to the incident data compiled by the CPSC,this consumer safety performancespecification attempts to minimize the following hazards:(1)suffocation,(2)tip over,(3)collapse,and(4)hood detachment.It also addresses corner post extensions,which may catch pacifier cords,ribbons,necklaces,or
4、clothing which a child may be wearing and which may be caught on a projection.Thisspecification does not cover products that are blatantly misused or used in a careless manner thatdisregards the safety instructions and warnings provided with each bassinet or cradle.1.Scope1.1 This consumer safety sp
5、ecification covers performancerequirements,test methods,and marking requirements topromote safe use of bassinets and cradles.1.2 This consumer safety performance specification is in-tended to minimize the risks of incidents to an infant resultingfrom normal use and reasonably foreseeable misuse of a
6、bassinet or cradle.1.3 This consumer safety performance specification coversproducts primarily intended to provide sleeping accommoda-tions for an infant up to approximately 5 months in age or whenthe child begins to push up on hands and knees,whichevercomes first.Products used in conjunction with a
7、n inclinedinfant swing or stroller,or products that are intended to providean inclined sleep surface(head-to-toe direction)of greater than10 from horizontal while in the rest(non-rocking)position arenot covered by this specification.1.3.1 RationaleThe addition of developmental criteriawas added to t
8、he 5-month age grade to accommodate varyingmotor skills in children.NOTE1Cradle swings with an incline less than or equal to 10 fromhorizontal while in the rest(non-rocking)position are covered under thescope of this standard.A sleep product that has an inclined sleepingsurface(intended to be greate
9、r than 10 from horizontal while in the rest(non-rocking)position)does not fall under the scope of this standard.Strollers that have a carriage/bassinet feature are covered by the stroller/carriage standard when in the stroller use mode.Carriage baskets/bassinets that are removable from the stroller
10、base are covered under thescope of this standard when the carriage basket/bassinet meets thedefinition of a bassinet/cradle found in 3.1.1.Bassinet/cradle attachmentsto cribs or play yards,as defined in 3.1.2 or 3.1.13,are included in thescope of the standard when in the bassinet/cradle use mode.1.4
11、 No bassinet or cradle produced after the approval date ofthis consumer safety performance specification shall,either bylabel or other means,indicate compliance with this specifica-tion unless it conforms to all requirements contained herein.1.5 This consumer safety performance specification is noti
12、ntended to address incidents and injuries resulting fromalteration or unreasonable abuse or misuse of the product by achild or child care giver.1.6 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are pro
13、vided for information onlyand are not considered standard.1.7 The following precautionary caveat pertains only to thetest method portion Section 7 of this consumer safety perfor-mance specification.This standard does not purport to addressall of the safety concerns,if any,associated with its use.It
14、isthe responsibility of the user of this standard to establishappropriate safety and health practices and determine theapplicability of regulatory requirements prior to use.2.Referenced Documents2.1 ASTM Standards:2D3359 Test Methods for Measuring Adhesion by Tape Test1This specification is under th
15、e jurisdiction of ASTM Committee F15 onConsumer Products and is the direct responsibility of Subcommittee F15.18 onCribs,Toddler Beds,Play Yards,Bassinets,Cradles and Changing Tables.Current edition approved Sept.1,2013.Published March 2014.Originallyapproved in 2002.Last previous edition approved i
16、n 2013 as F2194 13.DOI:10.1520/F2194-13A.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 F406 Consumer Safety Specification for Non-Full-SizeBaby Cribs/Play YardsF963 Consumer Safety Specification for Toy
