1、Designation:F237509Standard Practice forDesign,Manufacture,Installation and Testing of ClimbingNets and Netting/Mesh used in Amusement Rides,Devices,Play Areas and Attractions1This standard is issued under the fixed designation F2375;the number immediately following the designation indicates the yea
2、r oforiginal adoption or,in the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This practice establishes performance specifications andperfor
3、mance standards for the design,manufacturing,andmaintenance of netting and or mesh used in play areas andsystems designed for interactive play activities within amuse-ment attractions.1.2 The range of users encompassed by this safety perfor-mance specification is 32 in.(0.81 m)(2 years old,5thpercen
4、tile)through 50 in.(1.27 m)(8 years old,50thpercentile),50 in.(1.27 m)(8 years old,50th percentile)through 64 in.(1.62 m)(12 years old 95th percentile),32 in.(0.81 m)(2 years old,5th percentile)through 64 in.(1.62 m)(12 years old,95th percentile),and 64 in.(1.62 m)(12-yearold,95th percentile)through
5、 adult.1.3 The ages listed in this standard are intended to be usedas a guide for determining activities and use.The heightrequirements are the governing factor.1.4 Home playground equipment,matrix nets,nets usedas/or in fencing,sports equipment,fitness equipment,play-ground equipment covered by Con
6、sumer Safety PerformanceSpecification F1487 and soft contained play equipment(SCPE)covered by Safety Performance Specification F1918 in areasnot covered by F24 standards are not included in this standard.1.5This practice includes an appendix(non-mandatory),which provides additional information(for e
7、xample,rationale,background,interpretations,drawings,commentary,and soforth.)to improve the users understanding and application ofthe criteria presented in this practice.The appendix informa-tion shall not be interpreted as mandatory design criteria.1.6 This standard is intended for new climb areas
8、and majormodifications.1.7 Existing climb areas may qualify as compliant for fiveyears following the date of this publication of this practice aslong as any significant design related failures or significantdesign related safety issues have been mitigated.Thereafter,climb areas must qualify as“Servi
9、ce Proven”per PracticeF2291 or meet the requirements of this practice.1.8 The values stated in inch-pound units are to be regardedas standard.The values given in parentheses are mathematicalconversions to SI units that are provided for information onlyand are not considered standard.1.9 This standar
10、d does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety and health practices and determine the applica-bility of regulatory limitations prior to use.2.Referenced Documents2.1 ASTM Sta
11、ndards:2F747 Terminology Relating to Amusement Rides and De-vicesF770 Practice for Ownership,Operation,Maintenance,andInspection of Amusement Rides and DevicesF853 Practice for Maintenance Procedures for AmusementRides and Devices(Withdrawn 2014)3F893 Guide for Auditing Amusement Rides and Devices(W
12、ithdrawn 2013)3F1159 Practice for Design ofAmusement Rides and Devicesthat are Outside the Purview of Other F24 Design Stan-dardsF1193 Practice for Quality,Manufacture,and Constructionof Amusement Rides and DevicesF1292 Specification for Impact Attenuation of SurfacingMaterials Within the Use Zone o
13、f Playground EquipmentF1305 Guide for Classification of Amusement Ride andDevice Related Injuries and Illnesses(Withdrawn 2011)3F1487 Consumer Safety Performance Specification for Play-ground Equipment for Public Use1This practice is under the jurisdiction ofASTM Committee F24 on AmusementRides and
14、Devices and is the direct responsibility of Subcommittee F24.24 onDesign and Manufacture.Current edition approved March 1,2009.Published April 2009.DOI:10.1520/F2375-09.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Bo
15、ok of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.3The last approved version of this historical standard is referenced onwww.astm.org.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 F19
16、18 Safety Performance Specification for Soft ContainedPlay EquipmentF2291 Practice for Design ofAmusement Rides and Devices2.2 Other Standards:ASSE/ANSI A10.11 Safety Requirements for Personnel andDebris Nets4CDC Growth Charts CDC Basic Body Measurements5CI 1500 Test Methods for Fiber Rope6NFPA 701 Standard Methods of Fire Tests for Flame Propa-gation of Textiles and Films73.Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 safety net,nnet that is intended to arrest a fallingpe
