1、 INTERNATIONAL STANDARD IEC60384-8 QC 300600Third edition2005-05 Fixed capacitors for use in electronic equipment Part 8:Sectional specification:Fixed capacitors of ceramic dielectric,Class 1 Reference number IEC 60384-8:2005(E)LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCA
2、TION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series.For example,IEC 34-1 is now referred to as IEC 60034-1.Consolidated editions The IEC is now publishing consolidated versions of its publication
3、s.For example,edition numbers 1.0,1.1 and 1.2 refer,respectively,to the base publication,the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2.Further information on IEC publications The technical content of IEC publications is kept under constant r
4、eview by the IEC,thus ensuring that the content reflects current technology.Information relating to this publication,including its validity,is available in the IEC Catalogue of publications(see below)in addition to new editions,amendments and corrigenda.Information on the subjects under consideratio
5、n and work in progress undertaken by the technical committee which has prepared this publication,as well as the list of publications issued,is also available from the following:IEC Web Site(www.iec.ch)Catalogue of IEC publications The on-line catalogue on the IEC web site(www.iec.ch/searchpub)enable
6、s you to search by a variety of criteria including text searches,technical committees and date of publication.On-line information is also available on recently issued publications,withdrawn and replaced publications,as well as corrigenda.IEC Just Published This summary of recently issued publication
7、s(www.iec.ch/online_news/justpub)is also available by email.Please contact the Customer Service Centre(see below)for further information.Customer Service Centre If you have any questions regarding this publication or need further assistance,please contact the Customer Service Centre:Email:custservie
8、c.ch Tel:+41 22 919 02 11 Fax:+41 22 919 03 00 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.INTERNATIONAL STANDARD IEC60384-8 QC 300600Third edition2005-05 Fixed capacitors for use in electronic equipment Part 8:Sectional specificat
9、ion:Fixed capacitors of ceramic dielectric,Class 1 IEC 2005 Copyright-all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,electronic or mechanical,including photocopying and microfilm,without permission in writing from the publisher.International
10、 Electrotechnical Commission,3,rue de Varemb,PO Box 131,CH-1211 Geneva 20,SwitzerlandTelephone:+41 22 919 02 11 Telefax:+41 22 919 03 00 E-mail:inmailiec.ch Web:www.iec.ch W For price,see current catalogue PRICE CODE Commission Electrotechnique InternationaleInternational Electrotechnical Commission
11、 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.2 60384-8 IEC:2005(E)CONTENTS FOREWORD.3 1 General.6 1.1 Scope.6 1.2 Object.6 1.3 Normative references.6 1.4 Information to be given in a detail specification.7 1.5 Terms and definitions
12、.8 1.6 Marking.8 2 Preferred ratings and characteristics.9 2.1 Preferred characteristics.9 2.2 Preferred values of ratings.9 3 Quality assessment procedures.14 3.1 Primary stage of manufacture.14 3.2 Structurally similar components.14 3.3 Certified records of released lots.14 3.4 Qualification Appro
13、val.14 3.5 Quality Conformance Inspection.20 4 Test and measurement procedures.22 4.1 Visual examination and check of dimensions.22 4.2 Electrical tests.22 4.3 Temperature coefficient()and temperature cyclic drift of capacitance.24 4.4 Robustness of terminations.25 4.5 Resistance to soldering heat.2
14、5 4.6 Solderability.25 4.7 Rapid change of temperature(if required in the detail specification).26 4.8 Vibration.26 4.9 Bump.26 4.10 Shock.27 4.11 Climatic sequence.28 4.12 Damp heat,steady state.29 4.13 Endurance.30 4.14 Component solvent resistance.31 4.15 Solvent resistance of the marking.31 Anne
15、x A(normative)Figures with limits of variation of capacitance with temperature for certain temperature coefficients and classes.32 LICENSED TO MECON Limited.-RANCHI/BANGALOREFOR INTERNAL USE AT THIS LOCATION ONLY,SUPPLIED BY BOOK SUPPLY BUREAU.60384-8 IEC:2005(E)3 INTERNATIONAL ELECTROTECHNICAL COMM
16、ISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 8:Sectional specification:Fixed capacitors of ceramic dielectric,Class 1 FOREWORD 1)The International Electrotechnical Commission(IEC)is a worldwide organization for standardization comprising all national electrotechnical committees(IEC National Committees).The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields.To this end and in addition to othe
