1、Designation:E103495(Reapproved 2013)Standard Specification forNuclear Facility Transient Worker Records1This standard is issued under the fixed designation E1034;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of last revisi
2、on.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.INTRODUCTIONThere is a high degree of concern in the nuclear industry regarding the ability of present recordskeeping practices to adequately mon
3、itor the cumulative radiation doses of individual transientworkers.This concern arises from the fact that the transient worker moves rapidly among the nuclearfacilities,in some cases working at as many as four or more facilities within one calendar quarter.Theaccurate monitoring of a transient worke
4、rs cumulative radiation dose depends,in part,on theindividual workers ability(and willingness)to provide a correct record of his occupational radiationexposure.At nuclear facilities licensed by the U.S.Nuclear Regulatory Commission(NRC),these datapresently are supplied by the worker on forms NRC-4 a
5、nd NRC-5.Similar procedures are followedat other nuclear facilities(see Note 1).Accurate occupational radiation exposure data are required toensure that the radiation doses that an individual transient worker will receive are within regulatorylimits.Another problem confronting the owners of nuclear
6、facilities is how to in-process large numbers oftemporary workers efficiently.These workers may be required for such activities as the decontami-nation and decommissioning of a nuclear facility,the annual refueling of a nuclear power plant,or amajor special modification to an operating nuclear facil
7、ity.In-processing involves determining aworkers occupational radiation exposure history,security clearance,health status,ability to wear anduse respiratory protective equipment,and training and qualification for work in controlled areas.In-processing is the responsibility of the licensee,and depends
8、 on the cooperation of the worker andthe workers present and past employers and other past contracting licensees.In-processing is complicated by the fact that different facilities keep the required information ondifferent forms in varying degrees of detail.In-processing one worker often can take sev
9、eral days andresult in a loss of productive time as well as increased staffing costs for the facility operator.One possible solution to these problems is a cooperative effort within the nuclear industry todevelop a common or central data base that can be accessed to obtain pertinent historical data
10、on aworker.A central record keeping system(CRS)is envisioned for this purpose.Such a system couldhelp reduce in-processing time for temporary workers.However,some degree of standardization is necessary before a centralized record keeping systemis possible.This specification standardizes the necessar
11、y content of transient worker records.1.Scope1.1 This specification covers the required content and pro-vides retention requirements for records needed for in-processing of nuclear facility transient workers.1.2 This specification applies to records to be used forin-processing only.1.3 This specific
12、ation is not intended to cover specific skillsrecords(such as equipment operating licenses,ASME inspec-tion qualifications,or welding certifications).1.4 This specification does not reduce any regulatory re-quirement for records retention at a licensed nuclear facility.NOTE1Nuclear facilities operat
13、ed by the U.S.Department of Energy(DOE)are not licensed by the U.S.Nuclear Regulatory Commission(NRC),nor are other nuclear facilities that may come under the control of1This specification is under the jurisdiction of ASTM Committee E10 onNuclear Technology and Applicationsand is the direct responsi
14、bility of Subcommit-tee E10.03 on Radiological Protection for Decontamination and Decommissioningof Nuclear Facilities and Components.Current edition approved Jan.1,2013.Published January 2013.Last previousedition approved in 2008 as E1034-95(2008).DOI:10.1520/E1034-95R13.Copyright ASTM Internationa
15、l,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United States1 the U.S.Department of Defense(DOD)or individual agreement states.The references in this specification to licensee,the U.S.NRC RegulatoryGuides,and Title 10 of the U.S.Code of Federal Regulations are to implyappropriat
16、e alternative nomenclature with respect to DOE,DOD,oragreement state nuclear facilities.This distinction does not alter therequired content of records needed for in-processing of nuclear facilitytransient workers.NOTE2This specification does not define the form of the requiredworker records(such as a passport or central computerized record keepingsystem).2.Referenced Documents2.1 ASTM Standards:2E1168 Guide for Radiological Protection Training forNuclear Facility Workers2.2 ANSI Standards:ANSI N
