1、Designation:E1434 00(Reapproved 2006)Standard Guide forRecording Mechanical Test Data of Fiber-ReinforcedComposite Materials in Databases1This standard is issued under the fixed designation E1434;the number immediately following the designation indicates the year oforiginal adoption or,in the case o
2、f revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This guide provides a common format for mechanicaltest data for composite materials for two purposes
3、:(1)toestablish data reporting requirements for test methods and(2)to provide information for the design of material propertydatabases.This guide should be used in combination withGuide E1309 which provides similar information to identifythe composite material tested.1.2 These guidelines are specifi
4、c to mechanical tests ofhigh-modulus fiber-reinforced composite materials.Types oftests considered in this guide include tension,compression,shear,flexure,open/filled hole,2bearing,fracture toughness,and fatigue.The ASTM standards for which this guide wasdeveloped are listed in 2.1.The guidelines ma
5、y also be usefulfor additional tests or materials.1.3 This guide is the second part of a modular approach forwhich the first part is Guide E1309.Guide E1309 serves toidentify the material,and this guide serves to describe me-chanical testing procedures and variables and to record results.The interac
6、tion of this guide with Guide E1309 is emphasizedby the common numbering of data elements.Data ElementsA1through G13 are included in Guide E1309 and numbering dataelements in this guide begins with H1.1.4 This guide with Guide E1309 may be referenced by thedata-reporting section of a test method to
7、provide commondata-reporting requirements for the types of tests listed in 1.2.1.5 From this information and Guide E1309,the databasedesigner should be able to construct the data dictionarypreparatory to developing a database schema.1.6 Data elements in this guide are relevant to test data,dataas ob
8、tained in the test laboratory and historically recorded inlab notebooks.Property data,data which have been analyzedand reviewed,require a different level of data elements.Dataelements for property data are provided in Annex A1.2.Referenced Documents2.1 ASTM Standards:3D790 Test Methods for Flexural
9、Properties of Unreinforcedand Reinforced Plastics and Electrical Insulating MaterialsD3039/D3039M Test Method for Tensile Properties ofPolymer Matrix Composite MaterialsD3410/D3410M Test Method for Compressive Propertiesof Polymer Matrix Composite Materials with UnsupportedGage Section by Shear Load
10、ingD3518/D3518M Test Method for In-Plane Shear Responseof Polymer Matrix Composite Materials by Tensile Test ofa 645 LaminateD3552 Test Method for Tensile Properties of Fiber Rein-forced Metal Matrix CompositesD3878 Terminology for Composite MaterialsD5229/D5229M Test Method for Moisture AbsorptionP
11、roperties and Equilibrium Conditioning of Polymer Ma-trix Composite MaterialsD5379/D5379M Test Method for Shear Properties of Com-posite Materials by the V-Notched Beam MethodD5449/D5449M Test Method for Transverse CompressiveProperties of Hoop Wound Polymer Matrix CompositeCylindersD5528 Test Metho
12、d for Mode I Interlaminar FractureToughness of Unidirectional Fiber-Reinforced PolymerMatrix CompositesD5961/D5961M Test Method for Bearing Response ofPolymer Matrix Composite LaminatesD6115 Test Method for Mode I Fatigue DelaminationGrowth Onset of Unidirectional Fiber-Reinforced PolymerMatrix Comp
13、ositesE6 Terminology Relating to Methods of Mechanical TestingE111 Test Method for Youngs Modulus,Tangent Modulus,and Chord ModulusE1309 Guide for Identification of Fiber-ReinforcedPolymer-Matrix Composite Materials in DatabasesE1013 Terminology Relating to Computerized Systems1This guide is under t
14、he jurisdiction of ASTM Committee D30 on CompositeMaterials and is the direct responsibility of Subcommittee D30.01 on Editorial andResource Standards.Current edition approved Jan.15,2006.Published January 2006.Originallyapproved in 1991.Last previous edition approved in 2000 as E1434 00.DOI:10.1520
15、/E1434-00R06.2Documentation requirements for filled-hole tests were based on open-hole testswith the addition of fastener identification and application information.3For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book o
16、f ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.1Copyright(C)ASTM International,100 Barr Harbor Dr.,PO Box C-700 West Conshohocken,Pennsylvania 19428-2959,United States(Discontinued 2000)4E1443 Terminology Relating to Building and AccessingMaterial and Chemical Databases(Discontinued 2000)4E1484 Guide for Formatting and Use of Material andChemical Property Data and Database Quality Indicators(Discontinued 2000)4IEEE/ASTM SI 10 Standard for Use o
