1、Designation:D394219Standard Test Method forDetermination of the Unit Cell Dimension of a Faujasite-Type Zeolite1This standard is issued under the fixed designation D3942;the number immediately following the designation indicates the year oforiginal adoption or,in the case of revision,the year of las
2、t revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers the determination of the unitcell dimension of zeolites having the faujasite crystal structure,includi
3、ng synthetic Y and X zeolites,their modifications suchas the various cation exchange forms,and the dealuminized,decationated,and ultra stable forms of Y.These zeolites havecubic symmetry with a unit cell parameter usually within thelimits of 24.2 and 25.0 (2.42 and 2.50 nm).1.2 The samples include z
4、eolite preparation in the variousforms,and catalysts and adsorbents containing these zeolites.The zeolite may be present in amounts as low as 5%,such asin a cracking catalyst.1.3 This standard does not purport to address all of thesafety concerns,if any,associated with its use.It is theresponsibilit
5、y of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accor-dance with internationally recognized principles on standard-ization estab
6、lished in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standards:2E691 Practice for Conducting an Interlaboratory Study toDetermine t
7、he Precision of a Test Method3.Summary of Test Method3.1 A sample of the zeolite Y or X,or catalyst containingzeolite is mixed with powdered silicon.The zeolite unit celldimension is calculated from the X-ray diffraction pattern ofthe mixture,using the silicon reflections as a reference.4.Significan
8、ce and Use4.1Zeolites Y and X,particularly for catalyst and adsorbentapplications,are a major article of manufacture and commerce.Catalysts and adsorbents comprising these zeolites in variousforms plus binder and other components have likewise becomeimportant.Y-based catalysts are used for fluid cat
9、alytic crack-ing(FCC)and hydrocracking of petroleum,while X-basedadsorbents are used for desiccation,sulfur compound removal,and air separation.4.2 The unit cell dimension of a freshly synthesizedfaujasite-type zeolite is a sensitive measure of compositionwhich,among other uses,distinguishes between
10、 the twosynthetic faujasite-type zeolites,X and Y.The presence of amatrix in a Y-containing catalyst precludes determination of thezeolite framework composition by direct elemental analysis.4.3 Users of the test method should be aware that thecorrelation between framework composition and unit celldi
11、mension is specific to a given cation form of the zeolite.Steam or thermal treatments,for example,may alter bothcomposition and cation form.The user must therefore deter-mine the correlation that pertains to his zeolite containingsamples.3In addition,one may use the test method solely todetermine th
12、e unit cell dimension,in which case no correlationis needed.4.4 Other crystalline components may be present in thesample whose diffraction pattern may cause interference withthe selected faujasite-structure diffraction peaks.If there isreason to suspect the presence of such components,then a fulldif
13、fractometer scan should be obtained and analyzed to selectfaujasite-structure peaks free of interference.1This test method is under the jurisdiction of ASTM Committee D32 onCatalysts and is the direct responsibility of Subcommittee D32.05 on Zeolites.Current edition approved April 1,2019.Published M
14、ay 2019.Originallyapproved in 1980.Last previous edition approved in 2013 as D3942 03(2013).DOI:10.1520/D3942-19.2For referenced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the stan
15、dards Document Summary page onthe ASTM website.3Three correlations have been published for pure synthetic faujasite-typezeolites in the sodium or calcium form:Breck,D.W.,and Flanigen,E.M.,“Molecular Sieves,”Society of Chemical Industry,London,1968,p.47;Wright A.C.,Rupert,J.P.,and Granquist W.T.,Amer
16、.Mineral.,Vol 53,1968,p.1293;andDempsy,E.,Kuehl,G.H.,and Olson,D.H.,Journal of the Physical Chemistry,Vol73,1968,p.387.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshohocken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization T
