1、IEC 60086-3(Third edition 2011)Primary batteries Part 3:Watch batteries C O R R I G E N D U M 1 Table 11 Leakage levels and classification Replace,in Table 11,the heading“Diagramme”,by “Diagram”Annex A Designation Replace the existing annex by the following new annex:Copyrighted material licensed to
2、 BR Demo by Thomson Reuters(Scientific),Inc.,downloaded on Nov-28-2014 by James Madison.No further reproduction or distribution is permitted.Uncontrolled when printed.Annex A (normative)Designation Watch batteries manufactured with the express purpose of complying with this standard should be design
3、ated by a system of coded letters and numbers as shown below.However,the letter W is used to indicate compliance with IEC 60086-3.EXAMPLE:S R 7 21 S W Electrochemical system letter according to Table 4 Round cell:(according to IEC 60086-1)Dimension:diameter in millimetres Dimension:height in tenths
4、of millimetres Electrolyte:-S:Sodium hydroxide NaOH(optional)-P:Potassium hydroxide KOH(optional)Letter P may be left out in the case of electrochemical system letter S-Organic electrolyte:null Letter W:compliance with IEC 60086-3.September 2011 Copyrighted material licensed to BR Demo by Thomson Reuters(Scientific),Inc.,downloaded on Nov-28-2014 by James Madison.No further reproduction or distribution is permitted.Uncontrolled when printed.
