1、Designation:D827619Standard Test Method forHydrocarbon Types in Middle Distillates,including BiodieselBlends by Gas Chromatography/Mass Spectrometry1This standard is issued under the fixed designation D8276;the number immediately following the designation indicates the year oforiginal adoption or,in
2、 the case of revision,the year of last revision.A number in parentheses indicates the year of last reapproval.Asuperscript epsilon()indicates an editorial change since the last revision or reapproval.1.Scope1.1 This test method covers an analytical scheme using thegas chromatography/mass spectrometr
3、y(GC-MS)to determinethe hydrocarbon types present in middle distillates 170 C to365 C boiling range,5%to 95%by volume as determined byTest Method D86,including biodiesel blends with up to 20%by volume of fatty acid methyl ester(FAME).The detailedhydrocarbon composition,total aromatic hydrocarbon and
4、polycyclic aromatic hydrocarbon contents can be determined.The hydrocarbon types include:paraffins,noncondensedcycloparaffins,condenseddicycloparaffins,condensedtricycloparaffins,alkylbenzenes,indans or tetralins,or both,CnH2n-10(indenes,etc.),naphthalenes,CnH2n-14(acenaphthenes,etc.),CnH2n-16(acena
5、phthylenes,etc.),andtricyclic aromatics.The content of FAME in biodiesel blendscan also be determined by GC.1.2 The values stated in acceptable SI units are to beregarded as the standard.No other units of measurement areincluded in this standard.1.3 This standard does not purport to address all of t
6、hesafety concerns,if any,associated with its use.It is theresponsibility of the user of this standard to establish appro-priate safety,health,and environmental practices and deter-mine the applicability of regulatory limitations prior to use.1.4 This international standard was developed in accor-dan
7、ce with internationally recognized principles on standard-ization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recom-mendations issued by the World Trade Organization TechnicalBarriers to Trade(TBT)Committee.2.Referenced Documents2.1 ASTM Standar
8、ds:2D86 Test Method for Distillation of Petroleum Products andLiquid Fuels at Atmospheric PressureD2425 Test Method for Hydrocarbon Types in Middle Dis-tillates by Mass SpectrometryD4057 Practice for Manual Sampling of Petroleum andPetroleum ProductsD4177 Practice for Automatic Sampling of Petroleum
9、 andPetroleum ProductsD6299 Practice for Applying Statistical Quality Assuranceand Control Charting Techniques to Evaluate AnalyticalMeasurement System PerformanceD6300 Practice for Determination of Precision and BiasData for Use in Test Methods for Petroleum Products andLubricantsD8144 Test Method
10、for Separation and Determination ofAromatics,Nonaromatics,and FAME Fractions in MiddleDistillates by Solid-Phase Extraction and Gas Chromatog-raphy3.Terminology3.1 Definitions of Terms Specific to This Standard:3.1.1 The detailed definitions of the summation of charac-teristic mass fragments can be
11、found in Test Method D2425.3.1.2 dualcolumnGC-MSsystem,nagaschromatography/mass spectrometry system equipped with ahydrogen flame ionization detector(FID).Samples introducedby the sample introduction system are split into two capillarycolumns in parallel,in which one column connected to the FIDand t
12、he other one connected to the mass spectrometer.3.1.3 polycyclic aromatic hydrocarbons,nsum of theconcentrations of naphthalenes,CnH2n-14(acenaphthenes,etc.),CnH2n-16(acenaphthylenes,etc.)and tricyclic aromatics.3.1.4 total aromatic hydrocarbons,nsum of the concen-trations of alkylbenzenes,indans,te
13、tralins,CnH2n-10(indenes,etc.)and polycyclic aromatics.4.Summary of Test Method4.1 Samples are separated into saturate,aromatic,and/orFAME fractions by Test Method D8144.Aliquots of internalstandards are added to these fractions and all of these fractionsare analyzed by the dual column GC-MS system.
14、The contents1This test method is under the jurisdiction of ASTM Committee D02 onPetroleum Products,Liquid Fuels,and Lubricants and is the direct responsibility ofSubcommittee D02.04.0M on Mass Spectrometry.Current edition approved July 15,2019.Published September 2019.DOI:10.1520/D8276-19.2For refer
15、enced ASTM standards,visit the ASTM website,www.astm.org,orcontact ASTM Customer Service at serviceastm.org.For Annual Book of ASTMStandards volume information,refer to the standards Document Summary page onthe ASTM website.Copyright ASTM International,100 Barr Harbor Drive,PO Box C700,West Conshoho
16、cken,PA 19428-2959.United StatesThis international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for theDevelopment of International Standards,Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade(TBT)Committee.1 of the saturates,aromatic,and/or FAME fractions are calcu-lated based on the FID peak areas according to Test MethodD8144 and the detailed hydrocarbon c
